Why Mold Removal / Remediation?
Mold Inspection and Testing
Mold remediation requires an initial mold inspection to determine the extent of the damage and the proper steps for remediation. Our San Diego mold inspections may or may not require the collection of air samples, depending on whether the mold is visible. After data is collected and analyzed, proper recommendations for remediation can be made, and work can be performed. Third parties should conduct testing after work is completed to prevent conflicts of interest.
Ensuring the Safety of All Occupants and Workers
Without mold remediation, the adverse effects of mold expose individuals to health and safety hazards. Safety procedures include containment of the work area, use of air scrubbers and negative air machines, and personal protective equipment for those performing the remediation.
Create a Controllable Environment at the Mold Source
Mold contamination must be controlled at its source to remediate mold contamination. Spores become airborne during mold remediation and become difficult to capture. Creating a containment area makes the work environment more manageable and safe for the occupants, allowing workers to get rid of mold.
Remove Mold
Physical mold removal is the most effective technique for remediation. The exposed substrate should then be either sanded or wire brushed. The contaminated debris is then placed in 6mil plastic bags and disposed of. All of the surfaces within a containment should then be HEPA vacuumed followed by a damp wipe using a mild detergent. Attempts to kill, encapsulate or inhibit mold, instead of proper source removal, generally are not adequate.
Eliminate the Mold’s Water Source
Moisture in the affected area must be eliminated to prevent re-contamination. The area must be completely dried, or the mold growth will reappear.
